STX Electronics. 5050 - Analog/Digital Module

Analog module with 8 or 16 inputs and optional analogue outputs. Choose from single ended or differential input.

Key Benefits
Time Saving:

Standard screwdriver connection to your wiring - no soldering or crimping needed

The test-mode features a simple command line for easy testing

Hot-swapping of I/O devices makes troubleshooting hassle free

High Performance:

This module can be set to run at 3 times the speed of other units, delivering improved accuracy of process response

If speed is important, then addition of the 5100, 5101 or 5102 board in this series allows 10 times greater speed whilst maintaining accuracy

15 bit accuracy at 10 samples/sec

Rejects 50Hz and 60Hz hum

Versatile:

Can be controlled from the serial port of any computer using the 5001 RS232-485 converter

Supports the industry standard OPTO22 communications protocol and inexpensive RS485 two wire network

The input terminals support a wide range of positive or negative switched pick-ups and sensors

Easy to Install:

Panel or DIN rail mountable, or can be stacked with a stacking kit

Well labelled, robust enclosure for simple installation

Can be used with most standard power adaptors

All connectors can be unplugged

The 5031 adaptor can be used for a further reduction of wiring complexity

Safe:

Fully floating circuitry protects your computer from power spikes

Microprocessor controlled watchdog feature disables all outputs in the extremely unlikely event of processor failure

Built-in Reliability:

Designed to exceed international standards for noise immunity

Complete isolation of all comms and I/O sections minimises outside interference errors

5 LEDs and a comprehensive trouble-shooting guide for easy diagnosis of suspected system fault

Used In:
Remote Data Acquisition Industrial Process Control Transducer -

Signal

Weight

Pressure

Flow

Voltage

Current

Temperature measurement

Process control with 4-20mA output

Many other applications

Allows remote reading of temperature, voltage, and current. This unit also comes with the option of two 4-20mA outputs.

Specification

Unregulated supply	12V or 24Vdc
Max power consumption (12Vdc)	94mA
Max power consumption (24Vdc)	94mA
Comms power consumption	22mA
Comms power consumption TX mode	52mA (120 Ohm terminating resistor)
Communication network	Isolated RS485
Communications protocol	OPTO22 or memory mapped
Size in mm	172(w) x 120(h) x 30(d) (6.8"x 4.7"x 1.2")
DIN rail adapter	Add 32mm to depth (d)
DIN rail adapter	Add 32mm to depth (d)
With 5031 adapter	Add 40mm to height (h) and 8mm to depth (d)

Inputs
Analog	8 differential or 16 single ended
Analog types	1V, 10V, 0-20mA, J, K, T
Sampling rate	10 samples per second
ADC Type	MAX132 18 bit multi-slope integrating
A/D Resolution	Opto22: 12 bit (1 in 4096) H/S: 15 bit plus sign (1 in 32768)
Overall Accuracy	±2 bits
Reference Stability	2ppm/ºC
Total Drift	20ppm of FSR/ºC
Noise rejection	50Hz / 60Hz selectable
Input Impedance	210k ohms
Common mode rejection ratio (Differential modules only) Vcm = 10V	1V range: 0.09% of FSR typical 10V range: 0.009% of FSR typical 20mA range: 0.045% of FSR typical

Outputs
D/A resolution(4-20mA output)	12bit for Opto22 or 1uA for memory mapped high speed
D/A offset error (4-20mA output)	0.1%
D/A gain error (4-20mA output)	0.2%

For 10 or more units, or special pricing requirements, please contact the STX Sales Team

$733.90 (USD)