Key Benefits
Time Saving:
Standard screwdriver connection to your wiring - no soldering or crimping needed
The test-mode features a simple command line for easy testing
Hot-swapping of I/O devices makes troubleshooting hassle free
High Performance:
Can count moving production units at up to 350 per second
This module can be set to run at 3 times the speed of other units, delivering improved accuracy of process response
If speed is important, then addition of the 5100, 5101 or 5102 board in this series allows 10 times greater speed whilst maintaining accuracy
Output capability of 5A per output
Versatile:
Can be controlled from the serial port of any computer using the 5001 RS232-485 converter
Supports the industry standard OPTO22 communications protocol and inexpensive RS485 two wire network
The input terminals support a wide range of positive or negative switched pick-ups and sensors
Easy to Install:
Panel or DIN rail mountable, or can be stacked with a stacking kit
Well labelled, robust enclosure for simple installation
Can be used with most standard power adaptors
All connectors can be unplugged
The 5031 adaptor can be used for a further reduction of wiring complexity
Safe:
Fully floating circuitry protects your computer from power spikes
Microprocessor controlled watchdog feature disables all outputs in the extremely unlikely event of processor failure
Built-in Reliability:
Designed to exceed international standards for noise immunity
Complete isolation of all comms and I/O sections minimises outside interference errors
21 LEDs and a comprehensive trouble-shooting guide for easy diagnosis of suspected system fault
Used in:
Security Access Devices
Materials Handling
Production Lines
Robots
Glass Houses
Heating/ventilation Systems
Custom Machinery
Warehouse automation
Many other applications
Specification
| Unregulated supply |
12V or 24Vdc |
| Max power consumption (12Vdc) |
172mA |
| Max power consumption (24Vdc) |
204mA |
| Comms power consumption |
22mA |
| Communication network |
Isolated RS485 |
| Communications protocol |
OPTO22 or memory mapped |
| Size in mm |
172(w) x 120(h) x 30(d) (6.8"x 4.7"x 1.2") |
| DIN rail adapter |
Add 32mm to depth (d) |
| DIN rail adapter |
Add 32mm to depth (d) |
| With 5031 adapter |
Add 40mm to height (h) and 8mm to depth (d) |
| Digital Outputs |
8 |
| Digital Inputs |
8 |
| |
|
| Inputs |
|
| Isolation voltage |
1kVrms |
| Voltage range |
3V to 30Vdc |
| Logic level 0 |
1V max |
| Logic level 1 |
3V - 30Vdc |
| Resistance |
2k2 |
| |
|
| Outputs |
|
| Maximum N/O contact rating |
5A at 30Vdc and 250Vac |
| Isolation distance |
9.5mm |
| Relay isolation |
10kVat 1.2x50µs standard surge wave |
| Dielectric/ Surge strength |
5kVac for 1 minute between coil and contact 750Vac for 1 minute between open contact |
| Maximum switching voltage |
250Vac or 30Vdc |